Product Description
What if applying a ceramic coating was as simple as washing it on? Now it is with Poorboy’s World Hybrid Wash & Rinse Ceramic Coating.
Hybrid Wash & Rinse Ceramic Coating is not a car wash soap but it is a ceramic coating that you apply with a wash mitt, bucket or foam gun. This is a true ceramic coating system designed to be applied through a wash-style process on a properly cleaned and prepared surface. It’s built for the moment after the vehicle has been properly prepped, washed, decontaminated, and is ready to accept protection.
The truth about ceramic coatings is they do not bond to dirt, and they don’t perform on unprepared paint. Hybrid Wash & Rinse from Poorboy's World exists for when the surface is already right… and you want to protect it the fastest, most efficient way possible.
Traditional coatings require careful application, leveling, and timing. Hybrid Wash & Rinse changes the process but not the result.
Using advanced SiO2 ceramic emulsions combined with graphene dispersion, this formula allows you to apply a uniform, durable coating layer simply by working it across the surface and rinsing it in.
No panel leveling. No high-spot anxiety. No drawn-out application process.
Just controlled application… and activation on rinse.
As the product is spread across the surface, ceramic and graphene components begin laying down a continuous protective layer. When rinsed, that layer activates and bonds, leaving behind a slick, glossy, highly hydrophobic finish that behaves like a freshly coated surface—because it is one.
Water beads tighter. It sheds faster. The surface feels smoother, more refined, and distinctly protected.
This isn’t temporary gloss enhancement. This is real SiO2 ceramic protection.
With proper surface preparation prior to application, Hybrid Wash & Rinse is capable of delivering up to 6 months of durability depending on environmental conditions and maintenance routine. That means reduced contamination adhesion, easier upkeep, and a finish that holds its clarity and depth over time.
What makes it different is how the coating is delivered.
Instead of a traditional wipe-on, level-off process, this system uses a controlled wash-style application to spread the coating evenly, followed by a rinse phase that activates and sets the layer across the entire surface.
The result is consistent coverage without the complexity.
No missed spots. No uneven leveling. No unnecessary steps.
Just a faster way to apply real ceramic protection.
This is for the person who understands that prep matters—and wants the payoff without the traditional application process slowing them down.
The kind of finish that doesn’t just look clean… it looks finished. Sealed. Complete.
Hybrid Wash & Rinse Ceramic Coating doesn’t change what ceramic protection does.
It changes how you apply it.
DIRECTIONS
Step 0: Surface Preparation (Critical)
Hybrid Wash and Rinse is a ceramic coating and must be applied to a clean, properly prepared surface.
Before use, the vehicle must be fully washed and free of dirt, road film, and all embedded contaminants. If the surface feels rough, perform appropriate decontamination (such as clay treatment or chemical decon) prior to application.
Do not apply to a dirty or unprepared surface.
Step 1: Prepare Application Solution
Add 2 oz of product to 2 gallons of water for bucket application, or use a foam cannon or foam gun for even distribution. Whether you choose a bucket or a foam gun/cannon, even and overlapping passes with a wash mitt are required before rinsing to ensure that you obtain the best results.
Step 2: Apply Coating
Using a microfiber wash mitt, apply the product evenly across the surface. Work panel by panel to ensure complete, uniform coverage starting at the top of the vehicle and working your way down.
Step 3: Rinse (Activation Stage)
Rinse thoroughly. As water contacts the surface, the ceramic coating activates and begins bonding to the paint, glass, and trim.
Step 4: Dry
Dry with a clean microfiber towel using straight, overlapping motions to reveal a slick, glossy, hydrophobic finish.
Hybrid Wash & Rinse Ceramic Coating from Poorboy’s World is a wash-applied coating system designed for properly prepared vehicles—delivering a true SiO2 + graphene protective layer through a fast, controlled application process.
This is not a replacement for proper prep. It’s a better way to apply ceramic protection once prep is complete.
The result is a smooth, high-gloss, hydrophobic finish with real durability—without the complexity of traditional coating application.
Safe for all exterior automotive surfaces including paint, glass, plastic, and trim when used on properly prepared surfaces.
